Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎02-06-2007

LUNs not showing up directly after reboot

Hi,

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: LUNs not showing up directly after reboot

Andreas,See here for exact Certification into a Compatibility Matrix.

TechHelp24
New Contributor
Posts: 2
Registered: ‎02-06-2007

Re: LUNs not showing up directly after reboot

Hi,Yes all three switches are running 5.1.0d. HBA-drivers, firmware, OS, are fully supported in the EMC support matrix. I will open up a case on that today.

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: LUNs not showing up directly after reboot

Andreas,the FC-xxxx and CX-xxx Series Array use a Agent to connect to Host/Server , what i think... use the DMX Series a same procedure also any Agent ? Probable is this not correct configured, and so the LUN's not respond immediately after Server is Reboot ?

TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.