Fibre Channel (SAN)

Reply
New Contributor
barry.tzdaka
Posts: 3
Registered: ‎12-13-2012

I open Zone Admin on DS300B and it's stuck at 57%

Hi,

I've got 2 DS300B SAN Switches. Firmware 6.3.1a

I had a problem that when I open Zone Admin it was stuck at 90% and never opens.

There are not many effective zone on both switches at all

Anyway - I upgraded both to FOS 6.4.1a. now on one switch the problem is solved but on the other it's now stuck on 57%

I'm really perplexed here.

What might be the issue?

Please help me.

Thank you.

New Contributor
barry.tzdaka
Posts: 3
Registered: ‎12-13-2012

Re: I open Zone Admin on DS300B and it's stuck at 57%

Hi,

Looks like 2 ports on the switch cause this kind of behavior.

First I ran switchdisable and the problem was solved.

The for debugging I started enabling each port at a time until I figured out the ports that causes the issue.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.