Fibre Channel (SAN)

Reply
New Contributor
Posts: 3
Registered: ‎04-07-2013
Accepted Solution

I have a problem with a Logical Fabric in Brocade 6510 with virtual fabric, this LF don't permit execute cfgneable on default switch, because this reboot immediately

I have a problem with a Logical Fabric in Brocade 6510 with virtual fabric, this LF don't permit execute cfgneable on default switch, because this reboot immediately

Brocade Moderator
Posts: 271
Registered: ‎08-31-2009

Re: I have a problem with a Logical Fabric in Brocade 6510 with virtual fabric, this LF don't permit execute cfgneable on default switch, because this reboot immediately

Hello,

 

What is the FOS release installed into this switch?

There is a possible relevant defect listed into 7.4.1d release note. Defect #586977.

Attached is the release note.

 

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
New Contributor
Posts: 3
Registered: ‎04-07-2013

Re: I have a problem with a Logical Fabric in Brocade 6510 with virtual fabric, this LF don't permit execute cfgneable on default switch, because this reboot immediately

Hi Thierry

thanks for your help, actually the version is even lower than the one you indicate,

++++++++++++++++++++++++++++++++++++++++++
Fa_XXX_YYY: FIDNN: admin> firmwareshow
Appl Primary / Secondary Versions
------------------------------------------
FOS v7.3.0a
          V7.3.0a
Fa_XXX_YYY: FIDNN: admin>
++++++++++++++++++++++++++++++++++++++++++

So should we upgrade the switch to a higher version than FOS 7.4.1d? What would be the recommended version?

Brocade Moderator
Posts: 271
Registered: ‎08-31-2009

Re: I have a problem with a Logical Fabric in Brocade 6510 with virtual fabric, this LF don't permit execute cfgneable on default switch, because this reboot immediately

Hello,

 

The recommended version is 7.4.1d.

The defect is fixed into that release.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
New Contributor
Posts: 3
Registered: ‎04-07-2013

Re: I have a problem with a Logical Fabric in Brocade 6510 with virtual fabric, this LF don't permit execute cfgneable on default switch, because this reboot immediately

ok thks.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.