Fibre Channel (SAN)

Reply
Occasional Visitor
Posts: 1
Registered: ‎01-23-2015

I am new to brocade fc switch, and trying to boot but it stops in between

I am new to brocade fc switch, and trying to boot but it stops in between as shown below, can anyone advice please,

 


U-Boot 1.1.3 (Jun 5 2008 - 23:49:03)

CPU: AMCC PowerPC 440EPx Rev. A at 660 MHz (PLB=132, OPB=66, EBC=33 MHz)
No Security/Kasumi support
I2C boot EEPROM enabled
Bootstrap Option G - Boot ROM Location I2C (Addr 0x54)
Internal PCI arbiter enabled, PCI async ext clock used
32 kB I-Cache 32 kB D-Cache
Board: Tomahawk
I2C: ready
DRAM: Initializing DDRSDRAM
DDR Init: speed = 132000002
DQS calibration - Window detected:
max_passing_cases = 0
wr_dqs_shift = 0
dll_dqs_delay_X = 0
dll_dqs_delay_X window = 0 - 0
DDR0_09=0x00011d00
DDR0_22=0x0026200b
DDR0_17=0x00005b00
DDR0_18=0x00000000
DDR0_19=0x00000000
ECC Enabling
Start memory clearing @ 0x00000000 size = 0x20000000...addr = 0x10000000
addr = 0x20000000
DONE
512 MB

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.