Fibre Channel (SAN)

Reply
mar
New Contributor
Posts: 3
Registered: ‎07-07-2011

How to boot back up FOS image?

5300 upgrading firmware to 7.02

 

System reports

 

Please avoid powering off the system during prom update.

ipv6 ##################################################

awk ##################################################

ipsec ##################################################

fsl8548-brcdecc-module ##################################################

eccrepd ##################################################

Removing unneeded files, please wait ...

There was a problem cleaning /bin, retrying

There was a problem cleaning /bin, retrying

....

There was a problem cleaning /tftpboot, retrying

There was a problem cleaning /lib/modules/default, retrying

There was a problem cleaning /lib/modules/default, retrying

There was a problem cleaning /lib/modules/default, retrying

Finished removing unneeded files.

All packages have been downloaded successfully.

Firmware has been downloaded to the secondary partition of the switch.

HA Rebooting ...

 

Hangs

 

AC cycle switch now

 

 

sysmodAttach open failed: No such device or address

fabsys device open: No such device or address

fcsw1:FID128:admin>

The system is coming up, please wait...

 

 

 

## Booting image at 00400000 ...

Image Name: Linux-2.6.14.2

Image Type: PowerPC Linux Multi-File Image (gzip compressed)

Data Size: 2668159 Bytes = 2.5 MB

Load Address: 00000000

Entry Point: 00000000

Contents:

Image 0: 1589482 Bytes = 1.5 MB

Image 1: 1078663 Bytes = 1 MB

Uncompressing Multi-File Image ... ## Current stack ends at 0x3FB66BB8 => se0## initrd at 0x00584138 ... 0x0068B6BE (len=1078663=0x107587)

Loading Ramdisk to 1fef8000, end 1ffff587 ... OK

initrd_start = 1fef8000, initrd_end = 1ffff587

## Transferring control to Linux (at address 00000000) ...

tlbcam_index=11

mpc85xx_setup: Doing Pcie bridge setup

Installing Linux 2.6 Kernel

Attempting to find a root file system on hda1...

INIT: version 2.78 booting

Bypassing firmware validation.

INIT: Entering runlevel: 3

Starting Fabric OS Services...

FIPS off, RRD...

 

Error 1 returned by insmod while loadingodule

Error 1 returned by insmod while loading xprt-module

Error 1 returned by insmod while loading isc-module

Error 1 returned by insmod while loading tp-module

Error 1 returned by insmod while loading hasm-module

Error 1 returned by insmod while loading rscmon-module

 

 Have a admin prompt but no command available any document on booting alternate image

 

 

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.