Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎05-02-2011

HBA815 Direct connect to LTO3 Tandberg T40

Hello,

I try to connect my HBA 815 card with an Ultrium LTO3, under Win2003 or Win2008R2_64. I can't see the LTO.

I have a lot of system event : "Base port (WWN=xxxxxxxx) lost fabric connectivity"

Source : bfad

and i have application event : hcmagent - id event 4096

Do you have any idea ?

thanks

Contributor
Posts: 36
Registered: ‎11-06-2008

Re: HBA815 Direct connect to LTO3 Tandberg T40

Hello Alacan,

Currently, the Brocade BR-815 is only supported point-to-point connection, hence, direct connectivity (FC-AL) is NOT supported at this time; however, the next driver/firmware 3.x code which will be released sometime early next year in 2012 and this will support direct connection (FC-AL). In the mean time, you will need to conect the Brocade BR-815 and the LTO3 Tandberg T40 via Fibre Channel switch.

New Contributor
Posts: 2
Registered: ‎05-02-2011

Re: HBA815 Direct connect to LTO3 Tandberg T40

Thank you very much.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.