Fibre Channel (SAN)

Reply
New Contributor
Posts: 3
Registered: ‎07-21-2008

Full fabric license not working...

I have a full fabric license installed but when I connect it to another switch it tells me, "E-Port segmented,(No Fabric License)"

If you examine the attached text file that contains the output of the SUPPORTSHOW command, you'll see conflicting information. Under the _licenseshow _section you can see the fabric license but under the _fabswitchshow _section it shows, "fabric license: FALSE"

I doublechecked to make sure it was a Full Fabric license and I checked to make sure the ports were configured to enable E-Ports. Any ideas what's wrong with this switch?

External Moderator
Posts: 4,811
Registered: ‎02-23-2004

Re: Full fabric license not working...

fullers,

--->>>.....but when I connect it to another switch....

what is another switch ? Brocade or other Manufacturing ? Are both switch correct configured ? Domain ID, Switch Parameters etc.....?

TechHelp24

TechHelp24
New Contributor
Posts: 3
Registered: ‎07-21-2008

Re: Full fabric license not working...

They are both 16-port Brocade switches with 5.2.1a firmware on one switch (BrocadeD) and 5.1.0b firmware on the other (BrocadeA).

BrocadeA is set to domain ID 10 and Brocade D is set to domain ID 13.

BrocadeD is the new switch I'm adding and I've deleted all the zoning on the switch.

I checked the configuration of the port I want to ISL on both switches (port 2) and they both have E-Ports enabled.

The problem seems to be with BrocadeA. As I stated in the original post, it shows the fabric license I installed in the output from the licenseshow command...

brocadeA:admin> licenseshow
SeedzyyReeTffe0S:
Web license
bzQe9Qzdyzc0RfAe:
Zoning license
bddbbceQcScueccB:
Ports on Demand license - additional 4 port upgrade
bddbbceQcSceiccz:
Ports on Demand license - additional 4 port upgrade
cbRRQdcyddcSSRv:
* Fabric license*

The cbRRQdcyddcSSRv license code is a, "Full Fabric Upgrade for Small/Medium Silkworm Switches"

But it doesn't show the fabric license in the output from the fabswitchshow command...

fabswitchshow:
Fabric Switch State Structure Information
=========================================
State: D2
Stage: cold done
Rdi Receive Timer: 0x1060dc60, IDLE STATE
Unconfirmed Sw Timer: 0x1060ddc8, IDLE STATE
NTP Timer: 0x1060deb8, IDLE STATE
ME Timer: 0x1060df30, IDLE STATE
Principal Domain: 10
Upstream Port: 16
Principal Wwn: 10:00:00:05:1e:03:99:e8
Principal Priority: 0xfe
Flags: 0xc0e4
me retry count: 0
inq_sem count: 1
ha efp count: 0
fab_q current count: 0
fab_q high water: 3
fab_q age: 0 (sec)
dup xid occurrence: 0
iu nodes outstanding: 0
EFP update port: 16
test check point: No check point set
fabric license: FALSE
* fabric EFP version: 1*
* fabric dlist count: 1*
fabric alist count: 0
NTP ports online:

And here's the output from the switchstatusshow command that shows the segmented E-Port (No Fabric License)...

switchstatusshow:
Switch Health Report Report time: 07/21/2008 08:07:16 PM
Switch Name: brocadeA
IP address: 10.1.50.202
SwitchState: HEALTHY
Duration: 9372:56
Power supplies monitor HEALTHY
Temperatures monitor HEALTHY
Fans monitor HEALTHY
Flash monitor HEALTHY
Marginal ports monitor HEALTHY
Faulty ports monitor HEALTHY
Missing SFPs monitor HEALTHY
Fabric Watch is not licensed
Detailed port information is not included
switchshow:
switchName: brocadeA
switchType: 34.0
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 10
switchId: fffc0a
switchWwn: 10:00:00:05:1e:03:99:e8
zoning: ON (brocadeA_default_zone)
switchBeacon: OFF
Area Port Media Speed State
==============================
0 0 id 4G Online F-Port 10:00:00:00:c9:59:37:23
1 1 id 2G Online F-Port 10:00:00:00:c9:54:3d:73
2 2 id 2G Online E-Port segmented,(No Fabric License)
3 3 id N2 Online F-Port 10:00:00:00:c9:51:e8:15
4 4 id N4 Online F-Port 10:00:00:00:c9:52:99:dc
5 5 id N2 Online F-Port 10:00:00:00:c9:4a:0d:c8
6 6 id 2G Online F-Port 50:05:07:63:00:c5:b6:7b
7 7 id N2 Online F-Port 10:00:00:00:c9:46:73:ec
8 8 id 4G Online F-Port 10:00:00:00:c9:59:42:ec
9 9 id N4 No_Light
10 10 id 2G Online F-Port 10:00:00:00:c9:60:22:89
11 11 id N2 Online F-Port 50:05:07:63:00:c9:b6:7b
12 12 id N4 No_Light
13 13 id N4 No_Light
14 14 id 2G Online F-Port 50:05:07:63:00:cd:b6:7b
15 15 id N2 Online F-Port 10:00:00:00:c9:46:63:70

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.