Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 10
Registered: ‎02-21-2012

Forget to convert the fabric Watch to MAPS.

Hi,

 

 we need to convert the fabric wat to MAPS before upgrade the FOS to 7.4.x.  now, customer forget to convert the fabric to MAPS. They cannot use the email alert and fabric watch on FOS7.4

 

Do you have any recommend, how to monitor, set the alert same like fabric watch

 

 

Many Thanks,

 

External Moderator
Posts: 4,813
Registered: ‎02-23-2004

Re: Forget to convert the fabric Watch to MAPS.

[ Edited ]

Hi,

 

--->>>.....customer forget to convert the fabric to MAPS. They cannot use the email alert and fabric watch on FOS7.4

 

convert FW config to MAPS bevore upgrade is recommended but not mandatory.

 

the convert features is just as for convenience, instead to recreate all of the thresholds and rules.

 

In you case if the email alert is not work properly, you have here 100% a mismatch config and this have nothing to do if you convert FW or no.

 

I would suggest to review the MAPS Admin Guide and to check the Switch configuration.

 

 

TechHelp24
Occasional Contributor
Posts: 10
Registered: ‎02-21-2012

Re: Forget to convert the fabric Watch to MAPS.

Hi Antonio, 

 

Thank you very much for your suggestion. I will check with customer about MAPS admin Guide and check switch configuration.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.