Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 5
Registered: ‎08-20-2010

FabOS 6.1.2 switch parameters information

Can anyone let me know what the following parameters are for?

thresh.cust.fabric.ED.above

thresh.cust.fabric.ED.unit

thresh.fabricED.actLevel

thresh.fabricED.thLevel

when I run a configshow "fabric" command these appear in only one SW4100 switch in my SAN.

The other nine SW4100 switches do not show these parameters.

Thanks

External Moderator
Posts: 4,786
Registered: ‎02-23-2004

Re: FabOS 6.1.2 switch parameters information

for threshold and fabric watch,

switchstatuspolicyshow and switchstatuspolicyset command

for details refer the command reference manual

TechHelp24
Super Contributor
Posts: 635
Registered: ‎04-12-2010

Re: FabOS 6.1.2 switch parameters information

These are FabricWatch parameter which were change to custom values.

I assume that ED is the E-port down in the Fabric class.

Someone set the above value and the alert settings.

Please check the FabricWatch reference guide. I have added the FW guide of 6.3 and not 6.1.2

SO you will not find all of the values in guide on your SAN switch until you do an update

I hope this helps.

Andreas

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.