Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 9
Registered: ‎02-04-2013

FWS624G Setup for SAN Enviroment

Can anyone point me in the right direction on getting these 2 switches configured for my SAN environment? Someone told me to look over this link http://www.brocade.com/downloads/documents/configuartion_guides/BrocadeFCX_iSCSI_SAN_ConfigGuide_GA-CG-285-00.pdf  but it doesn't apply to my switches. These switches came with the EMC SAN from CDW.

Thanks

Occasional Contributor
Posts: 9
Registered: ‎02-04-2013

Re: FWS624G Setup for SAN Enviroment

After going through a bunch of different documentation this is the config I've come up with so far. Port 1 -12 will be used for iSCSI, 13 -24 is blocked out for LAN but I won't have anything plugged into it unless for temporary management.

!

Startup-config data location is flash memory

!

Startup configuration:

!

ver 07.0.01cT7e1

!

module 1 fws1g-24-port-copper-base-module

!

!

!

!

vlan 1 name DEFAULT-VLAN by port

no spanning-tree

!

vlan 2 name iSCSI by port

untagged ethe 0/1/1 to 0/1/12

spanning-tree 802-1w

!

vlan 3 name LAN by port

untagged ethe 0/1/13 to 0/1/24

spanning-tree 802-1w

!

!

!

!

!

!

aaa authentication web-server default local

jumbo

enable super-user-password .....

enable port-config-password .....

enable read-only-password .....

enable aaa console

hostname iSCSI-Switch1

ip address 10.10.10.10 255.255.255.0

no ip dhcp-client auto-update enable

no ip dhcp-client enable

ip default-gateway 10.10.10.1

username admin password .....

clock summer-time

clock timezone us Eastern

interface ethernet 0/1/1

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/2

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/3

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/4

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/5

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/6

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/7

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/8

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/9

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/10

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/11

flow-control neg-on

link-aggregate active

!

interface ethernet 0/1/12

flow-control neg-on

link-aggregate active

!

!

!

!

!

!

!

end

Contributor
Posts: 57
Registered: ‎08-12-2009

Re: FWS624G Setup for SAN Enviroment

tstumbo,

I suggest you post this question into the Ethernet Switches / Routers forum. The folks over there can definitely answer all of your questions. This forum mostly focuses on the fibre channel product functionality. I'm not aware of a function to cross post your question between forums.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.