Fibre Channel (SAN)

Reply
N/A
Posts: 1
Registered: ‎05-16-2009

FWS4802 Upgrade beginner question

Hello,

I'm new to the Foundry/Brocade family and have recently aquired a FWS4802. It seems to have basic layer 3 capabilities and I'm wondering if this can be upgraded to a full layer 3 switch. I was able to find some links online that point to an upgrade called FWS4802-UP. I'm just wondering how to confirm that this is what I need.

This is the output from me performing a "show ver". I'd appreciate any help that people would be willing to provide.

Thanks!

SS4802-LabSW(config)#sh ver
   SW: Version 08.0.01rT51 Copyright (c) 1996-2004 Foundry Networks, Inc.
       Compiled on Jul 29 2008 at 23:10:03 labeled as B2S08001r
       (2792998 bytes) from Primary Fastiron_Switch_code.bin
   HW: Stackable FI4802, SYSIF version 21, Serial #: Non-exist
==========================================================================
       Serial #:   CH35015514
  2048 KB BRAM, JetCore ASIC IPC version 43, BIA version 00
32768 KB PRAM and 1M-Bit*1 CAM for IPC  0, version 1843
32768 KB PRAM and 1M-Bit*1 CAM for IPC  1, version 1843
==========================================================================
   466 MHz Power PC processor 750 (version 8/8302) 66 MHz bus
   512 KB boot flash memory
16384 KB code flash memory
   256 KB SRAM
   128 MB DRAM
The system uptime is 4 minutes 3 seconds
The system : started=cold start

External Moderator
Posts: 4,813
Registered: ‎02-23-2004

Re: FWS4802 Upgrade beginner question

You can not Download Firmware for Brocade or Brocade / Foundry Products withuot a active Maintenance Contract.

Ask you Reseller or Local SE about that.

TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.