Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎08-26-2008

FSS-1001 Component \(swc\) dropping HA data update

Hi

I have a problem wtih the warning "dropping HA data update", the version is FOS 6.2.0c.

I don't stand where is the problem, because that error is logged generally at 01:00AM.

During the day, does not generate any warning, it is a recoverable error, because the CP is operative.

I didn't make any change after update.

Any idea?

Regards

Claudio

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: FSS-1001 Component \(swc\) dropping HA data update

Claudio,

see below.

FSS-1001
Message: <timestamp>, , <sequence-number>,, WARNING, <system-name>, Component
(<component name>) dropping HA data update (<update ID>).

Probable Cause: Indicates that an application has dropped a high availability (HA) data update.

Recommended Action:

Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed
system.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.

Severity WARNING

TechHelp24
N/A
Posts: 1
Registered: ‎04-24-2008

Re: FSS-1001 Component \(swc\) dropping HA data update

Hi:

The problem was solved, when I run a fastboot commnad on the standby CP Slot6 should clear up this issue.

Kind Regards

Claudio

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.