Fibre Channel (SAN)

Reply
New Contributor
Posts: 4
Registered: ‎04-26-2013

Enabling port for EX but VF is enabled

Hello,

I have two switches in my fabric.

Both switches have the default VF configuration.

I now need to enable a port for EX to connect to another fabric.

Looking at documentation it seems I have two options:

1. Create a base switch and put the a port in there so I can configure it as an EX port

2. Disable vf and select any port(s) for EX

As I have active devices on this fabric are there any comments or pros and cons for the above.

I have a second fabric with two additional switches so my devices are split over the two fabrics.

I have the IR license installed on one switch.

The requirement for an EX port is temporary whilst we do some migration.

Thanks

Glenn

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Enabling port for EX but VF is enabled

Hi there,

I'd rather use the first option since it is a fully online operative: you can create a new VF with the Base role non-disruptively; configure the FCR environment without any impact and once you've finished, you can undo everything and leave it as it is now.

Rgds,

Felipon

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.