Fibre Channel (SAN)

Reply
bkc
New Contributor
Posts: 4
Registered: ‎10-13-2010

DS-5000B Cannot Boot

Output from the reboot below:-

Booting "Fabric Operating System" image.                                       
Read map file failedd ID to platform index
Resetting ATA controller.                   
Chec
Read map file failedds any key to stop tes
Resetting ATA controller.                     


Retry reading the first kernel image                           

Syste
Resetting ATA controller.OST RAM Test succeeded. 
Retry reading the first kernel image             

Press escape within
ATA()0x9dfc7's entry point is too small (0x00003DB8 < 0x00100000)                      
Booting "Fabric Operating System" image.
Booting "Fabric Operating System" image.ead map file failedd                   
Resetting ATA controller..                       
Blk map has an invalid version 0          
Resetting ATA contro
Blk map has an invalid version                            

The system is coming up, please wait...OSLoader has an invalid magic number (0
Read board ID of 0x88 from addr 0x23                         
Resetting
Read extended model ID of 0x26 from addr 0x22OSLoader has an invalid magic number (0x00000
Matched board/model ID to platform index 17            
ATA()0x1a24e8's entry point i

Read board ID of 0x88 from addr 0x23                                   
Read extended model ID of 0x26 fr                              
Booting "Fabric Operating System" image.Read board ID of 0x88 from addr 0x23   
Read map file failedd         
Read exten
Resetting ATA controller.addr 0x22               
Read map file failedd      
Matched board
Resetting ATA controller.x 17                    
Retry reading the first kernel image of 0x88 from addr 0x23            
Blk map has an invalid version 0
Blk map has an invalid version 0
ThisOSLoader has an invalid magic number (0x00000000)
Resetting ATA controller.
ThisOSLoader has an invalid magic number (0x00000000)
ATA()0x1a24e8's entry point is too small (0x00000000 < 0x00100000)
OSLoader contains no bootable devices.


The system is coming up, please wait...
Read board ID of 0x88 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17

Read board ID of 0x88 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17
Press escape within 4 seconds to enter boot interface.

1) Start system.
2) Recover password.
3) Enter command shell.

Option?


> printenv
AutoLoad=yes
ENET_MAC=00051E903A57
InitTest=ATA()
LoadIdentifiers=Fabric Operating System;Fabric Operating System
OSLoadOptions=quiet;quiet
OSLoader=ATA()0x9dfc7;ATA()0x1a24e8
OSRootPartition=hda1,hda2
SkipWatchdog=yes
gatewayip=192.168.20.5
ipaddr=192.168.20.5
sbumask=255.255.255.0
>

What should i do?

Super Contributor
Posts: 644
Registered: ‎03-01-2007

Re: DS-5000B Cannot Boot

That show to me as Hardware defective.

If the switch is under maintenance by Brocadeor they Vendor, open a call to procede with replacement.

If you are satisfied with the responses please mark as 'Answered'.
If not, just let me know I can see to get more info.
I would appreciated if you rate the threads.

Thank you.

bkc
New Contributor
Posts: 4
Registered: ‎10-13-2010

Re: DS-5000B Cannot Boot

Come out that can not read confirmation result CF card.

Perhaps, is method that can format CF card and remount Packge?

Super Contributor
Posts: 644
Registered: ‎03-01-2007

Re: DS-5000B Cannot Boot

Such methode is available but only from Brocade Support.

You need here a special Boot File in order to reload a FOS.

bkc
New Contributor
Posts: 4
Registered: ‎10-13-2010

Re: DS-5000B Cannot Boot

Is no there method that can receive boot image?

Super Contributor
Posts: 644
Registered: ‎03-01-2007

Re: DS-5000B Cannot Boot

You can obtain this Boot Image only from Brocade when the Switch is Under Maintenance Contract.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.