11-01-2013 08:34 PM
I've only one configuration in my switch. As of now, there is only zone present in that configuartion.
Now this server has been decommisioned and the zoning for this server is also not required but the problem is I'm not able to removing the zoning as I assume that a configuration cannot exists without a zone.
CFGSHOW OUTPUT :
Host_hba2; cx340_spa1; cx340_spb0
Thanks and Regards,
11-04-2013 10:58 PM
So do you mean that i'll have to disable the configuration first using the command :-
cfgdisable "Configuration Name"
Then cfgdelete "Configuration Name"
No need to remove zone from the configuration and alias from the zone. We can straight away delete the configuration as per the scenario mentioned above.
11-18-2013 08:20 AM
With 'cfgdisable' you will disable the cfg zone2_12_17_2008.
Once done that, you have some options:
This will delete this cfg but the zone will remain.
On the other hand, you can perform:
This will delete all the cfgs, zones and alias from the effective configuration.