Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 10
Registered: ‎08-24-2009

Clear automatically Counters on DCX Directors

Hello,

we have four Brocade DCX Directors (Two Fabrics) at our company.

The microcode version of the DCX Directors is v6.2.0g.

What we want is clear automatically the Portcounters (Linf Failure, Loss of Sync, In Bytes (MB),.....) of each particular port on every direcotor. (for example every morning)

If I do this manually it is very time expensive, because I have to execute the "Clear counters" command on every port.

I search a solution to clear the Portcounters automatically for example with a script or something else.

Have anybody experience in that issue and can help me?

Thanks a lot

Regards

Daniel Hafendörfer

New Contributor
Posts: 3
Registered: ‎11-05-2008

Re: Clear automatically Counters on DCX Directors

You can try statsclear

Regards

Occasional Contributor
Posts: 10
Registered: ‎08-24-2009

Re: Clear automatically Counters on DCX Directors

@ jm1704: Thanks for your message.

statsclear is a good hint.

Is it possible to make a scipt within the statsclear command, so that this command runs automatically for example each morning? Because it is a little bit complex to execute the statsclear command on every of our 4 DCX Directors.

External Moderator
Posts: 4,881
Registered: ‎02-23-2004

Re: Clear automatically Counters on DCX Directors

statsclear

example 1

  example, all the port are in the list

example, all the port beetwen the Blade, in this example blade 1





TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.