Fibre Channel (SAN)

Reply
New Contributor
Posts: 3
Registered: ‎03-31-2009

Chassis is not ready for management now. Please try after some time.

We recently updated 4 4100's and 2 4900's to firmware release 6.2.0b. Now we are receiving the message "Chassis is not ready for management now. Please try after some time." while trying to browse to each switch. I need some advise on how to reslove this issue.

External Moderator
Posts: 4,813
Registered: ‎02-23-2004

Re: Chassis is not ready for management now. Please try after some time.

are all 6 switches in the same Fabric ? can you login to the switch trough Telnet ?

TechHelp24
New Contributor
Posts: 3
Registered: ‎03-31-2009

Re: Chassis is not ready for management now. Please try after some time.

Yes, all of the switches are in the same fabric and I can telnet to all of them. I am having this issue with 4 of the 6 switches.

External Moderator
Posts: 4,813
Registered: ‎02-23-2004

Re: Chassis is not ready for management now. Please try after some time.

dustin,

go to configure and check follow:

Brocade4100:root> /fabos/libexec/webdconfigure  
HTTP attributes (yes, y, no, n): y     set to y or yes
HTTP Restart (yes, y, no, n): y        set to y or yes
HTTP enabled (yes, y, no, n):         must be set to yes also enable.
ErrorLog Enabled (yes, y, no, n):    
AccessLog Enabled (yes, y, no, n):    
SSLLog Enabled (yes, y, no, n):    
HTTP Port: (1..60000)    
Secure HTTP Port: (1..60000)    
HTTP IsAlive Check Enabled (yes, y, no, n):     must be set to yes
HTTP Max HeapSize: (256..1024)    
webtools attributes (yes, y, no, n):    
cal attributes (yes, y, no, n):   

log as root and try "hareboot"

this procedure must work.

TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.