Fibre Channel (SAN)

Reply
New Contributor
Posts: 3
Registered: ‎06-15-2010

Cant Access GUI on Brocade 200e

Hi,

We have a Brocade 200e fibre switch which we cant access the GUI on.  I dont really want to have to reboot it if it can at all be avoided but i have no idea how to use the CLI.

Firstly does anyone know if i can reboot the services for the GUI without rebooting the switch?  and if so does anyone know of a manual for doing this?

Thanks for the help.

David

Contributor
Posts: 31
Registered: ‎04-16-2007

Re: Cant Access GUI on Brocade 200e

How did you try to access the switch by name or IP address? There was an issue prior to 6.3.0 in regard to this and the solution was to access with this IP address HTTP://IPaddress

New Contributor
Posts: 3
Registered: ‎06-15-2010

Re: Cant Access GUI on Brocade 200e

Hi,

Thanks for the reply.  I was a little bit wrong on the original question.  What happened is the switch network port didnt seem to be working at all.  We rebooted it in the end and it came straight back up.

Thanks for the help.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.