Fibre Channel (SAN)

Reply
New Contributor
Posts: 3
Registered: ‎06-10-2009

Brocade Link UP/Down traps...

Hello,

I'd like to setup a consistent monitoring based on a SNMP traps in all of "my" (customers under our support) Brocade SAN environments.

We have different topologies based on several types of switches (from 200E to DCX)...

According to my current investigation It looks like I need to use variable that could provide a message for link up/down

based on the "SlotNumber" / "PortNumber"  i.e. "Port: 1/9, Status: offline" or "Port: 9, Status: offline" if the switch doesn't have slots.

My question here is which MIB and especially trap have to be used to get similar message?

I'm a bit confused about the variables:

IfName, IfIndex, IfDescr, etc...

Any ideas/suggestions  are more than wellcome .

Best regards,

Hristo Kavlachki 

Super Contributor
Posts: 635
Registered: ‎04-12-2010

Re: Brocade Link UP/Down traps...

Check the OID swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37

If you are happy with this please mark the thread as correct.

Thanks,

Andreas

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.