Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 5
Registered: ‎09-01-2010

Brocade 7800 ISL with 48000 director

Hi,

To configure ISL trunk between 7800 router and 48000 director, what interope mode needs to be set and what firmware revision needs to be updated on both switches.

Regards,

Shree

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: Brocade 7800 ISL with 48000 director

7800 is a Extension Switch.

this can be connected to any available Port e.g. as E_Port and in Native Mode.

FOS v6.3.x is the min. Release Supported by 7800.

If you are satisfied with the responses please mark as 'Answered'.
If not, just let me know I can see to get more info.
I would appreciated if you rate the threads.

Thank you.

TechHelp24
Occasional Contributor
Posts: 5
Registered: ‎10-07-2010

Re: Brocade 7800 ISL with 48000 director

If firmware is higher on add switch than on fabric's switch. New (add) switch will be in segmented state.

So, I think, you must upgrade firmware on 48k the first.

Occasional Contributor
Posts: 9
Registered: ‎06-11-2010

Re: Brocade 7800 ISL with 48000 director

Hi,

Can you please guide me how to do ISL between 48000 directors. (all are on v 6.3.1b)

Regards

Sohal

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.