Fibre Channel (SAN)

BR-300 switch down

by Lucky_li on ‎10-17-2013 01:54 AM (1,880 Views)

Hi,

 

I hvae a BR-300 Switch;The switch status changed from HEALTHY to DOWN;

 

Information is as follows:

 

2013/10/10-07:14:16, [EM-1034], 119, CHASSIS, ERROR, Brocade300, Switch set to faulty, rc=20015.

 

2013/10/10-07:14:21, [FW-1424], 120, FID 128, WARNING, SW3600A, Switch status changed from HEALTHY to DOWN.

 

2013/10/10-07:22:54, [NBFS-1001], 121, FID 128, INFO, SW3600A, Duplicate E_Port SCN from port 22 in state NB_ST_INIT (1)

 

2013/10/10-07:22:54, [NBFS-1001], 122, FID 128, INFO, SW3600A, Duplicate E_Port SCN from port 23 in state NB_ST_INIT (1)

 

2013/10/10-07:29:14, [NBFS-1001], 123, FID 128, INFO, SW3600A, Duplicate E_Port SCN from port 22 in state NB_ST_INIT (1)

 

2013/10/10-07:29:14, [NBFS-1001], 124, FID 128, INFO, SW3600A, Duplicate E_Port SCN from port 23 in state NB_ST_INIT (1)

 

2013/10/10-07:31:59, [SEC-1203], 125, FID 128, INFO, SW3600A, Login information: Login successful via TELNET/SSH/RSH. IP Addr: 10.107.6.114

 

2013/10/10-07:36:09, [HAM-1004], 126, CHASSIS, INFO, Brocade300, Processor rebooted - Software Fault:Kernel Panic

 

2013/10/10-07:36:15, [TRCE-1001], 127, CHASSIS, WARNING, Brocade300, Trace dump available ! (reason: PANIC)

 

2013/10/10-07:36:15, [TRCE-1004], 128, CHASSIS, WARNING, Brocade300, Trace dump  was not transferred because trace auto-FTP disabled.

 

Please help analyze what causes the switch down.

 

Thanks.

 

Lucky Li

Comments
by mgoerla
on ‎10-23-2014 07:46 AM

Hello Lucky Li,

I have the same Problem with an Brocade Silkworm 5300 FC switch:

The switch show the status down and the messages reoccured massively over weeks before the  EM-1034 and the health status