Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 11
Registered: ‎01-10-2008

API - ERR_ACCESS_ERROR

Connecting to SAN fabrics using the API (same code been in use for 'years') now one of the fabrics is returning ERR_ACCESS_ERROR (error Code -56) on the FabAPI_EstablishSession. However it still works normally on the other fabrics. The failing fabric is entirely FOS 5.3.0c, but so is one of the fabrics that is OK. I'm therefore assuming that it isn't a FOS release problem (also checked through the 5.3.x release notes and there don't seem to be any hits). Anyone any ideas as to how to diagnose this one?

Occasional Contributor
Posts: 11
Registered: ‎01-10-2008

Re: API - ERR_ACCESS_ERROR

Solved this one at the time and should have posted so!

Problem was caused by the connection switch needing a password setting for one of the userids, set the password and the code started working!

Cheers,

Alastair

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.