Fibre Channel (SAN)

Reply
Visitor
Posts: 1
Registered: ‎08-19-2014

AD101 after factory defaulf

Hi!

IBM Brocade 20-port 8 Gb SAN Switch Module for IBM BladeCenter - restore factory default.

 

brocade8Gb:USERID> version
Kernel:     2.6.14.2
Fabric OS:  v6.3.1b
Made on:    Mon Apr 19 21:46:59 2010
Flash:      Fri Apr 15 01:53:52 2011
BootProm:   1.0.9

 

 

login as: USERID
USERID@192.168.21.224's password:

-----------------------------------------------------------------
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.

Password was not changed. Will prompt again at next login
until password is changed.
brocade8Gb:USERID> ad --show
Current AD Number: 0  AD Name: AD0

Effective configuration:
------------------------
no configuration

brocade8Gb:USERID> ad --exec AD255 "ad --show"
Current AD Number: 255  AD Name: AD255

Transaction buffer configuration:
---------------------------------
no configuration

Defined configuration:
----------------------

AD Number: 101  AD Name: AD101  State: Active

        Device WWN members:             20:01:00:1b:32:22:22:9f;
                                        20:01:00:1b:32:22:73:9e;
                                        10:00:00:c0:dd:19:74:12;
                                        20:01:00:1b:32:22:24:9e;
                                        20:01:00:1b:32:b9:64:fc;
                                        20:01:00:1b:32:b9:d0:fa;
                                        20:01:00:1b:32:a3:7a:58;
        Switch port members:            101,3; 101,2; 101,1; 101,0;
                                        101,7; 101,6; 101,5; 101,4;
                                        101,11; 101,10; 101,9; 101,8;
                                        101,15; 101,14; 101,13;
                                        101,12; 101,18; 101,19;
                                        101,16; 101,17;

Effective configuration:
------------------------
no configuration

brocade8Gb:USERID>

 What?!

brocade8Gb:USERID> ad --select AD255

-----------------------------------------------------------------
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.

Password was not changed. Will prompt again at next login
until password is changed.
brocade8Gb:AD255:USERID> ad --delete AD101
You are about to delete an AD.
This operation will fail if zone configuration exists in the AD
Do you want to delete 'AD101' admin domain  (yes, y, no, n): [no] yes
brocade8Gb:AD255:USERID> ad --save

Set defzone mode to noaccess in AD0 context before configuring ADs
brocade8Gb:AD255:USERID> ad --apply

Set defzone mode to noaccess in AD0 context before configuring ADs
brocade8Gb:AD255:USERID> logout
brocade8Gb:USERID> defzone --noaccess
Operation allowed only in AD0 context and if no ADs are configured

 

Whot I do, for remove AD101 and get Access Gateway mode?

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.