Fibre Channel (SAN)

Reply
New Contributor
Posts: 3
Registered: ‎08-19-2015

7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

Hi , does anyone know which combination of MAPSrules and values are usable for BRCD6505 with only one Power Supply.

It seem that after update to 7.4.0a a mapspolicy for a switch with two power supplys is enabled.

All predefined policys are configured with the same values.

 

defCHASSISBAD_PWR_MARG                  |CHASSIS(BAD_PWR/NONE>=1)                          |SW_MARGINAL,SNMP,EMAIL     |
defCHASSISBAD_PWR_CRIT                  |CHASSIS(BAD_PWR/NONE>=2)                          |SW_CRITICAL,SNMP,EMAIL     |
defCHASSISBAD_FAN_MARG                  |CHASSIS(BAD_FAN/NONE>=1)                          |SW_MARGINAL,SNMP,EMAIL     |
defCHASSISBAD_FAN_CRIT                  |CHASSIS(BAD_FAN/NONE>=2)                          |SW_CRITICAL,SNMP,EMAIL     |

 

regards

Lutz

Valued Contributor
Posts: 539
Registered: ‎03-20-2011

Re: 7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

As already discussed: clone one of the policies, modify your new copy and activate it.
New Contributor
Posts: 3
Registered: ‎08-19-2015

Re: 7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

Hi Alexey ,

thx for your response but my question is regarding to the correct values.

The default values and rules are for a switch with two power supplies.

We have only one power supplie , so it indicates a marginal warning.

 

What I wnat is to suppress the warning for the missing power supplie and fan.

 

regards Lutz

External Moderator
Posts: 4,909
Registered: ‎02-23-2004

Re: 7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

Lutz,

 

Forgot and ignore all the post here in the community about this error message in Brocade 6505.

 

 

Symptom : MAPS indicates the switch state is marginal if only one power supply unit is present on Brocade 6505.  
Conditions : This is only applicable to Brocade 6505 switch.  
Workaround : This erroneous message may be ignored.

 

This is a Defect000564334  and there - AFAIK - is no workaround today.

 

The defect will be closed in coming next Release.

TechHelp24
Occasional Visitor
Posts: 1
Registered: ‎05-30-2016

Re: 7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

Hi,

 

Do we have a Document with this information? i'm having the same problem.

External Moderator
Posts: 4,909
Registered: ‎02-23-2004

Re: 7.4.0a BRCD 6505 with single Power Supply MAPS Configuration

[ Edited ]

The DEFECT as be reported with FOS 7.4.1a

 

 

TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.