Ethernet Switches & Routers

Reply
New Contributor
Posts: 2
Registered: ‎02-24-2015
Accepted Solution

snmp public

On the ICX 6610 ( SW: Version 07.4.00fT7f3) and the ICX-6450 (SW: Version 07.4.00fT311) the switch responds to an SNMP query when the query uses a community name of public. However, there is no commnity name of public configured on the switch. For this reason the switches fail the PCI scan.

 

Has anyone coma across this and is waht is the resolution?

Occasional Contributor
Posts: 19
Registered: ‎05-23-2013

Re: snmp public

Try running 'show snmp server' and see if it shows the community name 'public' listed. If it is, you can enter, from global config mode, 'no snmp-server community public ro' (assuming it is read-only) to disable the community. These commands are on an ICX 6610 running 08.0.02a, but I believe the command string is the same on 07.4.00.

New Contributor
Posts: 2
Registered: ‎02-24-2015

Re: snmp public

Entering "no snmp-server community public ro" removes the public community string that does not show up in the configuration text. This resolves the problem.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.