Ethernet Switches & Routers

Reply
Senior Member
Posts: 1
Registered: ‎05-08-2016

no puedo habilitar OSPF en un switch ICX7450, me pueden indicar que licencia necesito?

hola a todos, 

 

mi switch tiene la siguiente version.

 

telnet@ICX7450-48 Switch#sh vers
version System status
telnet@ICX7450-48 Switch#sh version
Copyright (c) 1996-2014 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Sep 30 2014 at 02:46:45 labeled as SPS08020
(25238404 bytes) from Primary SPS08020.bin
SW: Version 08.0.20T211
Compressed Boot-Monitor Image size = 786944, Version:10.1.04T215 (spz10104)
HW: Stackable ICX7450-48
Internal USB: Serial #: 9900315101200262
Vendor: ATP Electronics, Total size = 1919 MB
==========================================================================
UNIT 1: SL 1: ICX7450-48 48-port Management Module
Serial #:CYQ3302M028
License: BASE_SOFT_PACKAGE (LID: easIIFHoFHN)
easIIFHoFHN)
P-ASIC 0: type B548, rev 01 Chip BCM56548_A0
==========================================================================
UNIT 1: SL 3: ICX7400-4X10GC 4-port 40G Module
==========================================================================
UNIT 1: SL 4: ICX7400-4X10GC 4-port 40G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
2048 MB DRAM
STACKID 1 system uptime is 25 days 18 hours 41 minutes 29 seconds
The system : started=cold start

telnet@ICX7450-48 Switch#

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.