Ethernet Switches & Routers

Reply
New Contributor
Posts: 2
Registered: ‎10-01-2015

lag lacp between icx 7450 and Catalyst switches 3750

Has anybody implemented lag lacp between icx 7450 and Catalyst switches like the 3750?

 

According to the Brocade documentation, they don't use LINK-AGGREGATE command anymore. It looks like they are using the LAG & DEPLOY command. Has anybody implemented lag lacp between icx 7450 and Catalyst switches like the 3750? I will apprecaite if somebody can share his/her experience. Thanks

Contributor
Posts: 37
Registered: ‎02-27-2015

Re: lag lacp between icx 7450 and Catalyst switches 3750

Here example for you. If you need help please go on writing here...

 

At Brocade side :

 

!

lag Cisco3750 dynamic id 25
 ports ethernet 1/1/1 to 1/1/2
 primary-port 1/1/1
 deploy

!

 

 

At Cisco side :

 

interface Port-channel25

[your other config lines...]

!


interface GigabitEthernet1/1

[your other config lines...]

channel-group 25 mode active
!
interface GigabitEthernet1/2
channel-group 25 mode active

[your other config lines...]

 

In fact there is no need to match lag ids at both side. The hint at Cisco side is using "mode active" directive...

 

Have fun...

--
Best Regards
Destan YILANCI

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.