Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 20
Registered: ‎05-08-2013

icx-6650 Equivalent Commands

Hi all,

           Please provide me with  the equivalent brocade command for icx6650 for the below cisco commands.

interface gigabitEthernet 0/1

no ip unreachables***

no mop enable

no ip mask-reply

Regards,


Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: icx-6650 Equivalent Commands

interface gigabitEthernet 0/1

     Answer - switch(config)#interface ethernet 1/0/1

no ip unreachables***

     Answer - switch(config)#no ip icmp unreachable

no mop enable

     Answer - Maintenance Operation Protocol (MOP) is a DECnet protocol - not used in Brocade

no ip mask-reply

     Answer - no equivalent command I know of.

Thanks

Michael.

Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: icx-6650 Equivalent Commands

correction for ""no ip mask-reply"

You can use an ext ACL to block this - icmp-type would be mask-reply in the syntax below.

Extended numbered ACL syntax

Syntax: access-list <ACL-num> deny | permit <ip-protocol> <source-ip> | <hostname>

            <wildcard> <destination-ip> | <hostname>

            <icmp-num> | <icmp-type>] <wildcard>

            ]

           

           

Thanks

Michael.

Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: icx-6650 Equivalent Commands

Hi j.khan,

     Is this enough information for you?

Thanks

Michael.

Occasional Contributor
Posts: 20
Registered: ‎05-08-2013

Re: icx-6650 Equivalent Commands

Thanks for info

Regards,

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.