Ethernet Switches & Routers

Reply
New Contributor
Posts: 4
Registered: ‎08-12-2016

how to make Trunk/Tag in ICX 7250-48 Model

Hi Team,

 

Can u brief explain how to make any port as Tagged in ICX 7250-48 model. 

 

External Moderator
Posts: 4,780
Registered: ‎02-23-2004

Re: how to make Trunk/Tag in ICX 7250-48 Model

ranjankumarsgh@gmail.com

 

I assume you have VLAN configured ? then you simple untagged the port.

TechHelp24
Brocade Moderator
Posts: 61
Registered: ‎06-10-2009

Re: how to make Trunk/Tag in ICX 7250-48 Model

If the port is not an untagged member of any vlan.  Then

 

vlan 100

tag eth 1/1/1

 

If it has already been defined as an untagged member of a vlan, you will need to remove it from that vlan first

Eg (assuming it was an untagged member of vlan 10)

 

vlan 10

no untag eth 1/1/1

vlan 100

tag eth 1/1/1

 

Steve

Contributor
Posts: 53
Registered: ‎07-20-2015

Re: how to make Trunk/Tag in ICX 7250-48 Model

 

Also, if you want a dual personality port wherby it passes tagged and untagged traffic.

 

vlan 100

tag eth 1/1/1

 

This will make port 1 pass tagged (802.1q) traffic (i.e. Voice) on VLAN 100 or regular untagged data on the default VLAN presumably VLAN 1 (unless you changed it)

 

interface ethernet 1/1/1

 dual-mode

!

 

Now if you wanted it to pass the untagged traffic on VLAN 10 instead of the default VLAN it would work like this:

 

  

interface ethernet 1/1/1

 dual-mode 10

!

 

If you want to do VoIP, you probably want to enable PoE as well (make sure you have the proper discovery protocol on for proper detection, too i.e. lldp, cdp etc.): 

 

interface ethernet 1/1/1

 dual-mode 10

 inline power

!

 

 

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.