02-18-2011 11:23 AM
Hey guys I've never worked with a Foundry switch before so I'm unfamiliar with some of their commands. I have a config script made for a Foundry switch that I need to convert over to a Cisco config. I know this is going to be an easy question to answer for you guys but what does the command "router-interface 34" perform and what is it's role? Below is the script that we use in our core switch to divert traffic to a different path during a maintenance window on a palisades box so that none of our users experience any downtime. I'm just trying to understand the command better so that I can make our script do the same thing on our new Cisco switch. All help is appreciated!!
no interface ve 34 --Cisco conversion to no int vlan 34
vlan 304 --Same
no router-interface 34 --need to know what Cisco command is? Is this basically tagging that port 34 to vlan 304?
no ip route 0.0.0.0 0.0.0.0 192.168.34.222 - Same
ip route 0.0.0.0 0.0.0.0 192.168.100.4 -Same
interface ve 34
ip address 192.168.34.5 255.255.255.0
no ip route 0.0.0.0 0.0.0.0 192.168.100.4
ip route 0.0.0.0 0.0.0.0 192.168.34.222
02-20-2011 01:26 PM
Router-interface enables Brocade/Foundry's Integrated Switch Routing (ISR) technology.
This mean local routeing (layer 3 VLAN).
The code you are replicating turns off a layer 3 VLAN and delete some route to it and vice versa.