Ethernet Switches & Routers

Reply
Brocadian
Posts: 18
Registered: ‎08-11-2012
Accepted Solution

Which SNMP OID should be used for reload a FastIron switch?

Is it possible to reload a FastIron switch/stack via SNMP? If so, what is the right OID for the snmp set to accomplish the task?

 

Thank you,

 

Lawrence

Brocade Moderator
Posts: 226
Registered: ‎06-30-2010

Re: Which SNMP OID should be used for reload a FastIron switch?

Hi Lawrence,

 

Looks like snAgReload could acheive what you are looking for

 

Here is the MIB guide https://www.brocade.com/content/html/en/mib-reference-guide/ipmib-apr2016-reference/GUID-BF70BB5B-B839-45FA-9FFD-A4816E76BCD4.html

 

Regards

Mick


If my response has solved your query please click the "Accept as Solution" button.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider.
Brocadian
Posts: 18
Registered: ‎08-11-2012

Re: Which SNMP OID should be used for reload a FastIron switch?

Thank you for your reply, Mick. I believe I did try out your suggested mib object but it didn't seem to work for me. That made me think that there is some else that I need besides that single mib object. But, I can go back and try it gain.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.