Ethernet Switches & Routers

Reply
New Contributor
kalub.j.ashby.mil
Posts: 2
Registered: ‎01-13-2013

SX800 Router Code Issue

Hello, I am currently running SXL07400 Router code on a SX800. However, it only appears to support RIP and VSRP, why doesn't it support OSPF or any of the other protocols? Thanks!

Contributor
serhat.kahraman
Posts: 61
Registered: ‎12-08-2009

Re: SX800 Router Code Issue


You need SXR07400  code. the management module also needs to be PREM.

telnet@SX800E#sh ver

Active Management CPU :

  SW: Version 07.3.00T3e3 Copyright (c) 1996-2011 Brocade Communications Systems, Inc.

      Compiled on XXXXXXXXX

      (4407439 bytes) Primary SXR07300.bin

      BootROM: Version 05.0.00T3e5 (FEv2)

      Chassis Serial  #:XXXXXXX

         License: SX_V6_HW_ROUTER_IPv4_SOFT_PACKAGE    (LID: XXXXXXXXXX)

  HW: Chassis FastIron SX 800-PREM (PROM-TYPE SX-FIL3U-6-IPV4)

==========================================================================

Standby Management CPU :

  SW: Version 07.3.00T3e3 Copyright (c) 1996-2011 Brocade Communications Systems, Inc.

      Compiled on XXXXXXX

      BootROM: Version 05.0.00T3e5 (FEv2)

  HW: Chassis FastIron SX 800-PREM (PROM-TYPE SX-FIL3U-6-IPV4)

hope this helps

Frequent Contributor
dvenkat
Posts: 118
Registered: ‎06-15-2009

Re: SX800 Router Code Issue

As Serhat mentioned above, you need the PREM license to be installed in the SX800 management modules & the following features will be supported .

• 6,000 active host routes

• Anycast RP

• BGP4

• DVMRP V2

• IGMP V1, V2, and V3

• ICMP redirect messages

• IGMP V3 fast leave (for routing)

• MSDP

• OSPF V2

• PIM-DM

• PIM-SM

• PIM passive

• Policy-based routing

• RIP V1 and V2

• Route-only support

• Route redistribution

• VRRP-E

• IPv4 over GRE

• Multicast over GRE

thanks,deepti

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.