10-02-2015 07:24 AM
Our MLXe8 router with BR-MLX-MR2-X and BR-MLX-10Gx20.
When I run ping commands from my PC to one of the IPs configured on this router, the ICMP time responses are high and vary a lot, times between 2ms and 40ms.
Pings to the management IP is fine in 1ms or less.
The pings are being executed from the local network.
The router CPU use is at 20%.
Is a normal behavior? The router changes the priorization of the packets?
Solved! Go to Solution.
10-02-2015 10:42 AM
Defect ID: DEFECT000545058
Technical Severity: High
Product: Multi-Service IronWare
Reported In Release: NI 05.7.00
Technology Area: Component
Symptom: MLX exhibits high PING latency for certain ICMP destined to routed interfaces on 20x10G line card.
Condition: In MCT network, when pinging a loopback or VE interface on MLX, high latency is observed.