Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 12
Registered: ‎02-01-2011

RADIUS Config

Does anyone have any experience configuring a FGS-24G using mac-auth using RADIUS?

My issues are:

1) How do I configure the RADIUS to identify the correct VLAN when I have some clients with static IPs on their port(s)?

This is the error received in the logs: "MAC Auth failed for (MAC ADD) on port 0/1/2 (Dynamic assignment is off and PVID is different)

2) Is it possible to configure multiple "Tunnel-Private-Group-ID" in the same statement? The statement works fine when I reference only one vlan, but my switch has more than one vlan for clients.

Frequent Contributor
Posts: 118
Registered: ‎06-15-2009

Re: RADIUS Config

Cedric, Its documented in configuration guide. Here is how you can configure on radius server.

  1. Specifying an untagged VLAN

To specify an untagged VLAN, use the following.

"U:10" or "U:marketing"

  1. Specifying a tagged VLAN

To specify a tagged VLAN, use the following.

"T:12;T:20" or "T:12;T:marketing"

  1. Specifying an untagged VLAN and multiple tagged VLANs

To specify an untagged VLAN and multiple tagged VLANs, use the following.

"U:10;T:12;T:marketing"

thanks,

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.