Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 15
Registered: ‎02-01-2013

Problem witch LACP within ICX6430 Firmware

Hi,

 

i have 1 ICX6430 with Firmware 08.0.10d version and 1 ICX6430 with firwmare 07.4.00fT311 version. I try connect with LACP but doesn´t work.

 

Firmware 08.xx the link-aggregate command is not exist. I try this configuration:

 

 

ICX6430 with Firmware 08.0.10d

----------------------------

 

lag "TRUNK" static id 2000
ports ethernet 1/1/43 to 1/1/44

 

----------------------------------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

ICX6430 with firwmare 07.4.00fT311

----------------------------

 

 

interface ethernet 1/1/43

link-aggregate configure key 33000
link-aggregate active
!
interface ethernet 1/1/44
link-aggregate configure key 33000
link-aggregate active

 

 

 

I never had problems with the firmware 07.4.00 but since upgrade to the 08.0.10 version never really I could create either the LACP

 

 

Thanks,

 

Nicolas

New Contributor
Posts: 2
Registered: ‎06-03-2011

Re: Problem witch LACP within ICX6430 Firmware

lag "TRUNK" dynamic id 2000
ports ethernet 1/1/43 to 1/1/44

deploy

...

This should be the right approach....

 

Brocadian
Posts: 37
Registered: ‎11-03-2014

Re: Problem witch LACP within ICX6430 Firmware

In FI 8.x code lags are configured differently than FI 7.x code.

 

I've attached the admin guide for reference.

Jonathon Lorek
Brocade Systems Engineer - Great Lakes Region
jlorek@brocade.com

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.