Ethernet Switches & Routers

Reply
Frequent Visitor
Posts: 1
Registered: ‎07-14-2011

Netiron MLX-16 Exception Type 1100 (Unknown Exception), sysloop

I have an error after upgrade the code to 05400b . all monitor images for management Modules and LP and FPGA were upgraded successfully.

after and Upgrade the Combined application image for management modules (xm05400b.bin) I received the following error.

NetIron MLX-16 Router#

NetIron MLX-16 Routercopy tftp flash 192.168.0.73 xm05400b.bin pri   

details of the error.

        ....................................................................................................................

Checksum problem, calculated = 0000bcbc

TFTP: Download to primary flash failed - File type check failed

NetIron MLX-16 Router#

NetIron MLX-16 Router#reload

Checking for coherence...

Warning: The new MP application ( 4  1  0  4) will not be compatible with

the new MP monitor ( 5  4  0  0) version.

Warning: The new LP 1 application ( 4  1  0  4) will not be compatible with

the new LP 1 monitor ( 5  4  0  0) version.

Warning: The new LP 2 application ( 4  1  0  4) will not be compatible with

the new LP 2 monitor ( 5  4  0  0) version.

Warning: The new LP 3 application ( 4  1  0  4) will not be compatible with

the new LP 3 monitor ( 5  4  0  0) version.

Warning: The new LP 4 application ( 4  1  0  4) will not be compatible with

the new LP 4 monitor ( 5  4  0  0) version.

Warning: The new LP 6 application ( 4  1  0  4) will not be compatible with

the new LP 6 monitor ( 5  4  0  0) version.

Warning: The new LP 10 application ( 4  1  0  4) will not be compatible with

the new LP 10 monitor ( 5  4  0  0) version.

Warning: The new LP PBIF FPGA will not be compatible with the new LP 1 application.

Warning: The new LP XPP FPGA will not be compatible with the new LP 1 application.

Warning: The new LP PBIF FPGA will not be compatible with the new LP 2 application.

NetIron XMR/MLX Boot Code Version 5.4.00

..MP.

Enter 'a' to stop at memory test

Enter 'b' to stop at boot monitor

..BOOT INFO: load monitor from code flash, cksum = b155 monitor 0x40000100

DMAC0 Link is up

BOOT INFO: verify flash files - max_code_flash_blocks..........

read_startup_config

INFO: New 16-slot backplane is detected.

ACTIVE: g_bp_board_class_val = 0x84, g_max_slave_slot = 16, g_max_snm_slot = 4, g_max_power = 8 ret_flags = 0x10

my_slot = 33

get_mac_and_arbitration_delay: no peer (present_reg = 1fffff)

BOOT INFO: load image from primary copy....

Exception Type 1100 (Unknown Exception), sysloop

00003030(msr)

b0000010(dar)

00000000(dsisr)

0000cdac(pc)

0000cda4(lr)

End of Trace

Exception Type 1100 (Unknown Exception), sysloop

00001030(msr)

b000000c(dar)

00000000(dsisr)

0006a258(pc)

000138f4(lr)

000138f4

00016880

0008375c

End of Trace

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.