Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 5
Registered: ‎09-06-2013

NI-MLX-10Gx8-M card error codes

We have a MLXe 8 with a NI-MLX-10Gx8-M card in slot 7. This AM the log file had the following:

 

Dec  3 00:12:52:ISmiley Frustratedystem: Interface ethernet 7/7, state down - card down

Dec  3 00:12:52:ISmiley Frustratedystem: Interface ethernet 7/6, state down - card down

Dec  3 00:12:52:ISmiley Frustratedystem: Interface ethernet 7/5, state down - card down

Dec  3 00:12:52:ISmiley Frustratedystem: Interface ethernet 7/4, state down - card down

Dec  3 00:12:52:ISmiley Frustratedystem: Interface ethernet 7/3, state down - card down

Dec  3 00:12:52:ISmiley Frustratedystem: Interface ethernet 7/2, state down - card down

Dec  3 00:12:52:ISmiley Frustratedystem: Interface ethernet 7/1, state down - card down

Dec  3 00:12:51:NSmiley Frustratedystem: Module down in slot 7, reason CARD_DOWN_REASON_REBOOTED. Error Code 0

 

What is error code 0? and what causes error code 0

New Contributor
Posts: 3
Registered: ‎12-02-2012

Re: NI-MLX-10Gx8-M card error codes

Hello,

 

A You resolve this problem?

Brocade Moderator
Posts: 219
Registered: ‎06-30-2010

Re: NI-MLX-10Gx8-M card error codes

[ Edited ]

Hi,

 

Error code 0 signifies that heartbeat to the line card has been lost and that has caused the card to reboot.

 

If the symptom persists you should contact Brocade TAC for further technical assistance

 

Regards

Mick


If my response has solved your query please click the "Accept as Solution" button.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider.
New Contributor
Posts: 3
Registered: ‎12-02-2012

Re: NI-MLX-10Gx8-M card error codes

Mick, Thank you

Can you tell me it's hardware or software problems

MLX needed replacing or enough to reconnected line card or something else?

Brocade Moderator
Posts: 219
Registered: ‎06-30-2010

Re: NI-MLX-10Gx8-M card error codes

Hi,

 

Most likely this would be a software error.

 

If the problem persists I would suggest that you contact TAC for additional support

 

Regards

Mick


If my response has solved your query please click the "Accept as Solution" button.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.