Ethernet Switches & Routers

Reply
Occasional Contributor
agayed
Posts: 7
Registered: ‎01-11-2013

Local DHCP addressing on the switch based on port number

Hello, I've worked a lot with Cisco, but am new to Brocade. How can I do this on Brocade switches?

Here is an example of what I'm doing on a Cisco switch.

conf t

ip dhcp use subscriber-id client-id

ip dhcp pool Example

network 10.0.10.0 /24

ip dhcp excluded-address 10.0.10.48 10.0.10.255

reserved-only

address 10.0.10.1 client-id Eth1/1 ascii

address 10.0.10.2 client-id Eth1/2 ascii

address 10.0.10.3 client-id Eth1/3 ascii

address 10.0.10.4 client-id Eth1/4 ascii

<continues>

address 10.0.10.48 client-id Eth1/48 ascii

int range eth1/0-48

ip dhcp server use subscriber-id client-id

Appreciate any assist you can offer.

Thank you.

Occasional Contributor
agayed
Posts: 7
Registered: ‎01-11-2013

Re: Local DHCP addressing on the switch based on port number

Just to clarify a bit. I want to do DHCP locally on the switch. I want the switch to assign an IP address based on what port the device is plugged in.

I.E. if someone plugs into port 13 they get IP address 192.168.1.13

Is there a way to do this? I've tried googling for this, but I cant find the commands to do this on FCX?

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.