Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 6
Registered: ‎04-26-2013

ICX7400-4x10GF Expansion Module Crashing on 1GIG SFPs?

These same SFPs work fine in 7750s

 

 

ICX7450>sh media e 1/2/1
stack: 0052791c 00d3fd0c 00d1b9e0 00b7ea78 00b7eb38 00478410 00a61350 00a6313c 00a64018 00a314b8 00475704 006a9774 005b8758 002b7708 002c6e3c 002c8bc4 002c7130 002c8bc4 002c7130 002c8bc4 002c7130 002cc524 0052c124 001a4d64 0063d0b8 00ee89e0 0063de40 00d10e7c 025353af

stack: 0052791c 00d3fd0c 00d1b9e0 00b7ea78 00b7eb38 00478410 00a61390 00a6313c 00a64018 00a314b8 00475704 006a9774 005b8758 002b7708 002c6e3c 002c8bc4 002c7130 002c8bc4 002c7130 002c8bc4 002c7130 002cc524 0052c124 001a4d64 0063d0b8 00ee89e0 0063de40 00d10e7c 025353af
M:9 L:0 - spatha_media_read, port 1/2/1, error in reading sfpp addr=50 offset=0 status=-1

stack: 0052791c 00d3fd0c 00d1b9e0 00b7ea78 00b7eb38 00478410 00a61350 00a641ec 004761c4 00a63354 00a64018 00a314b8 00475704 006a9774 005b8758 002b7708 002c6e3c 002c8bc4 002c7130 002c8bc4 002c7130 002c8bc4 002c7130 002cc524 0052c124 001a4d64 0063d0b8 00ee89e0 0063de40 00d10e7c 025353af

stack: 0052791c 00d3fd0c 00d1b9e0 00b7ea78 00b7eb38 00478410 00a61390 00a641ec 004761c4 00a63354 00a64018 00a314b8 00475704 006a9774 005b8758 002b7708 002c6e3c 002c8bc4 002c7130 002c8bc4 002c7130 002c8bc4 002c7130 002cc524 0052c124 001a4d64 0063d0b8 00ee89e0 0063de40 00d10e7c 025353af
M:9 L:0 - spatha_media_read, port 1/2/1, error in reading sfpp addr=51 offset=80 status=-1

I2C_ioctl failed: bus 1, dev 0x50, errno 121
I2C_ioctl failed: bus 1, dev 0x50, errno 121
------------------------------------------------------------------
I2C_ioctl failed: bus 1, dev 0x51, errno 121
I2C_ioctl failed: bus 1, dev 0x51, errno 121
------------------------------------------------------------------
Port   1/2/1: Type  : EMPTY

 

 

 

 

ICX7450>
ICX7450>sh ver
  Copyright (c) 1996-2015 Brocade Communications Systems, Inc. All rights reserved.
    UNIT 1: compiled on May 15 2015 at 00:51:40 labeled as SPR08030aa
      (31449284 bytes) from Primary SPR08030aa.bin
        SW: Version 08.0.30aaT213
      Compressed Boot-Monitor Image size = 786944, Version:10.1.05T215 (spz10105)
  HW: Stackable ICX7450-48-HPOE
  Internal USB: Serial #: 9900614121200012
      Vendor: ATP Electronics, Total size = 1919 MB
==========================================================================
UNIT 1: SL 1: ICX7450-48P POE 48-port Management Module
      License: ICX7450_L3_SOFT_PACKAGE 
      License Compliance: ICX7450-PREM-LIC-SW is Compliant
      P-ASIC  0: type B548, rev 01  Chip BCM56548_A0
==========================================================================
UNIT 1: SL 2: ICX7400-4X10GF 4-port 40G Module
==========================================================================
 1000 MHz ARM processor ARMv7 88 MHz bus
 8192 KB boot flash memory
 2048 MB code flash memory
 2048 MB DRAM
STACKID 1  system uptime is 1 minute(s) 17 second(s)
The system : started=cold start

 

 

 

CX7450(config-if-e10000-1/2/1)#speed-duplex 1000-full
stack: 0052791c 00d3fd0c 00d1b9e0 00b7ea78 00b7eb38 00478410 00a61350 00a6313c 00a64018 00a314b8 00475704 00820458 002b7708 002c6e3c 002c8bc4 002c7130 002cc524 0052c124 001a4d64 0063d0b8 00ee89e0 0063de40 00d10e7c 025353af

stack: 0052791c 00d3fd0c 00d1b9e0 00b7ea78 00b7eb38 00478410 00a61390 00a6313c 00a64018 00a314b8 00475704 00820458 002b7708 002c6e3c 002c8bc4 002c7130 002cc524 0052c124 001a4d64 0063d0b8 00ee89e0 0063de40 00d10e7c 025353af
M:9 L:0 - spatha_media_read, port 1/2/1, error in reading sfpp addr=50 offset=0 status=-1

stack: 0052791c 00d3fd0c 00d1b9e0 00b7ea78 00b7eb38 00478410 00a61350 00a641ec 004761c4 00a63354 00a64018 00a314b8 00475704 00820458 002b7708 002c6e3c 002c8bc4 002c7130 002cc524 0052c124 001a4d64 0063d0b8 00ee89e0 0063de40 00d10e7c 025353af

stack: 0052791c 00d3fd0c 00d1b9e0 00b7ea78 00b7eb38 00478410 00a61390 00a641ec 004761c4 00a63354 00a64018 00a314b8 00475704 00820458 002b7708 002c6e3c 002c8bc4 002c7130 002cc524 0052c124 001a4d64 0063d0b8 00ee89e0 0063de40 00d10e7c 025353af
M:9 L:0 - spatha_media_read, port 1/2/1, error in reading sfpp addr=51 offset=80 status=-1

I2C_ioctl failed: bus 1, dev 0x50, errno 121
I2C_ioctl failed: bus 1, dev 0x50, errno 121
------------------------------------------------------------------
I2C_ioctl failed: bus 1, dev 0x51, errno 121
I2C_ioctl failed: bus 1, dev 0x51, errno 121
------------------------------------------------------------------
ICX7450(config-if-e10000-1/2/1)#

Contributor
Posts: 23
Registered: ‎03-04-2014

Re: ICX7400-4x10GF Expansion Module Crashing on 1GIG SFPs?

Hi

 

What SFP is this ? Brand ? Specs ?

 

thanks

D.

Occasional Contributor
Posts: 19
Registered: ‎05-23-2013

Re: ICX7400-4x10GF Expansion Module Crashing on 1GIG SFPs?

Looking at your post, your module 2 is a 40G module. I haven't tried before, but will a 1G SFP work in those slots? Just wondering if that might be the issue.
Frequent Contributor
Posts: 104
Registered: ‎07-12-2011

Re: ICX7400-4x10GF Expansion Module Crashing on 1GIG SFPs?


GB_KIR wrote:
Looking at your post, your module 2 is a 40G module. I haven't tried before, but will a 1G SFP work in those slots? Just wondering if that might be the issue.

It isn't a 40G module, the 40G module is a single port card, this is the 4 port 10G module. Not sure why it lists 40G.

 

We haven't tried 1G sfp's in our 7450's yet, what model are you using?

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.