Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 5
Registered: ‎10-14-2015

How to configure the Create a Link Aggregation with brocade switch and fortinet firewall

 

Hi

 

 I am planning to implement the icx6450 switch in my network as l3 and i am having the fortinet firewall in my network ,can any body give me the solution are config example, To configure the link aggregation between the two products

 

Regards

Mithun

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contributor
Posts: 37
Registered: ‎02-27-2015

Re: How to configure the Create a Link Aggregation with brocade switch and fortinet firewall

Hi Mithun,

 

You only need to configure primary port as L3 interface/route-only interface. Then you can deploy the LAG.

Finally you should enter your ip address to talk with your firewall. It should be under your L3 interface.

 

Here is simple config for you:

 

Targitas#sh run
Current configuration:
!
ver 08.0.30bT213
!
stack unit 1
module 1 icx7450-24p-poe-port-management-module
module 2 icx7400-xgf-4port-40g-module
module 3 icx7400-qsfp-1port-40g-module
module 4 icx7400-qsfp-1port-40g-module
!
!
lag fortiLAG dynamic id 1
ports ethernet 1/1/1 to 1/1/2
primary-port 1/1/1
deploy
!
!
hostname Targitas-CE
!
!
interface ethernet 1/1/1
route-only

ip address 172.16.35.1 255.255.255.252
!
!
!
end

Targitas#

--
Best Regards
Destan YILANCI
Occasional Contributor
Posts: 5
Registered: ‎10-14-2015

Re: How to configure the Create a Link Aggregation with brocade switch and fortinet firewall

Destan YILANCI

 

         Thanks for the reply ,I will try and update the status

 

Regards,

Mithun

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.