Ethernet Switches & Routers

Reply
Visitor
Posts: 1
Registered: ‎09-19-2012

Getting log message MAC movement detected after code upgrade to 5.60d

 

 

Hi,

 

We just upgraded MLX-16 from 5.40d to 5.60d and we kept getting the following MAC movement detected messages flooding our log. Could someone please share with us how to supress the messages?

 

ep 18 10:35:17:W:IP/ARP: IP address AA.BB.CC.72 MAC movement detected, changed from MAC 0050.56a2.740b / port 6/1 to MAC 0050.568d.3efd / port 4/4
Sep 18 10:35:17:W:IP/ARP: IP address AA.BB.CC.72 MAC movement detected, changed from MAC 0050.568d.3efd / port 4/4 to MAC 0050.56a2.740b / port 6/1
Sep 18 10:35:05:W:IP/ARP: IP address AA.BB.CC.120 MAC movement detected, changed from MAC 0050.568d.6369 / port 4/4 to MAC 0050.568d.5581 / port 4/4
Sep 18 10:32:17:W:IP/ARP: IP address AA.BB.CC.72 MAC movement detected, changed from MAC 0050.56a2.740b / port 6/1 to MAC 0050.568d.3efd / port 4/4
Sep 18 10:32:17:W:IP/ARP: IP address AA.BB.CC.72 MAC movement detected, changed from MAC 0050.568d.3efd / port 4/4 to MAC 0050.56a2.740b / port 6/1
Sep 18 10:32:05:W:IP/ARP: IP address AA.BB.CC.120 MAC movement detected, changed from MAC 0050.568d.5581 / port 4/4 to MAC 0050.568d.6369 / port 4/4
Sep 18 10:32:05:W:IP/ARP: IP address AA.BB.CC.120 MAC movement detected, changed from MAC 0050.568d.6369 / port 4/4 to MAC 0050.568d.5581 / port 4/4
Sep 18 10:29:17:W:IP/ARP: IP address AA.BB.CC.72 MAC movement detected, changed from MAC 0050.56a2.740b / port 6/1 to MAC 0050.568d.3efd / port 4/4
Sep 18 10:29:17:W:IP/ARP: IP address AA.BB.CC.72 MAC movement detected, changed from MAC 0050.568d.3efd / port 4/4 to MAC 0050.56a2.740b / port 6/1

 

 

Occasional Contributor
Posts: 12
Registered: ‎03-26-2013

Re: Getting log message MAC movement detected after code upgrade to 5.60d

Try these:

 

no mac-notification interval <seconds configured now>

 

and

 

no mac-movement notification ...

Occasional Visitor
Posts: 1
Registered: ‎02-11-2011

Re: Getting log message MAC movement detected after code upgrade to 5.60d


andreyv wrote:

Try these:

 

no mac-notification interval <seconds configured now>

 

and

 

no mac-movement notification ...


Those commands are for layer2 devices - is there analog for layer3 devices.    Getting these messages too after upgrading to  5.6.0d

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.