Ethernet Switches & Routers

Reply
N/A
rscarboro
Posts: 1
Registered: ‎04-15-2011

Enabling SNMP on NetIron CER

So what is the special secret to allow snmp polling on a NetIron CER?  Typically on Brocade/Foundry switches its just "snmp-server community <string> ro" and that is what the config guide shows as well.  For some reason I can not get snmp requests on the NetIron CER to return.  This should be pretty dead simple.

Occasional Visitor
tiago.hirao
Posts: 1
Registered: ‎11-27-2012

Re: Enabling SNMP on NetIron CER

Yes, it is simple, I have configured here some CER with snmp running.

snmp-server

snmp-server community ..... ro

Regards,

Occasional Contributor
josh.farrelly
Posts: 11
Registered: ‎11-25-2012

Re: Enabling SNMP on NetIron CER

Keep in mind, on these devices you need to to enable the SNMP server. There is an additional configuration step compared to normal Brocade switches.

 

snmp-server

 

Check this by doing a show snmp server and look for "Status: Enabled"

 

Simple, but easy to miss.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.