Ethernet Switches & Routers

Reply
Highlighted
N/A
Posts: 1
Registered: ‎11-27-2012

Edgeiron4802CF, Password reset, Ctrl U not

working

hi,

My name is Anirudha and I am a student in community college
in florida . As  trainee student I am
working on few EdgeIron switches and I am not able to reset the password set by
previous user and hence not able to see configuration or test switches.

My problem is even after pressing the Ctrl U  the switch starts in normal mode rather
entering  diag. mode.

I am not able to reset password also I Get following data
garbage when I pree Ctrl U .

Model EdgeIron 4802CF

Problem Unable to reset
password

The dump on screen is as following….

                                                      cmic_read_miim ERROR: timeout
(addr=0x01 id=0x0a)

                      
LinkScan: Error: Unit 0 Port 10: Failed to recover link status: MII
register access timed out

                                   
cmic_read_miim ERROR: timeout (addr=0x01 id=0x0a)

      LinkScan: Error:
Unit 1 Port 10: Failed to recover link status: MII register access timed out

                 
cmic_read_miim ERROR: timeout (addr=0x01 id=0x0b)

                                                                  
LinkScan: Error: Unit 0 Port 11: Failed to recover link status: MII
register access timed out

cmic_read_miim ERROR:
timeout (addr=0x01 id=0x0b)

                                                
LinkScan: Error: Unit 1 Port 11: Failed to recover link status: MII
register access timed out

                                                             
cmic_read_miim ERROR: timeout (addr=0x01 id=0x0c)

                                LinkScan:
Error: Unit 0 Port 12: Failed to recover link status: MII register access timed
out

                                           
cmic_read_miim ERROR: timeout (addr=0x01 id=0x0c)

            
LinkScan: Error: Unit 1 Port 12: Failed to recover link status: MII
register access timed out

Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: Edgeiron4802CF, Password reset, Ctrl U not

Hope this helps.

Set the switch to its default configuration.

Make a direct connection to the switch’s console port (serial cable from switch to notebook/PC) and power cycle the switch. Immediately after powering on, press <Ctrl><u> to access the system file menu. Select <D> to delete all user-defined configuration files. Press <Q> to boot the switch.

Thanks

Michael.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Polls
How can we improve the Community?