Ethernet Switches & Routers

Reply
Contributor
Posts: 32
Registered: ‎12-06-2011

ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.xx.xx

Just logged into on fesx 448 prem console running as layer3 switch. Got lot of these messages popping up.

 

ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.117
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.59
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.58
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.68
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.78
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.116
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.69
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.62
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.71
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.127
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.24
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.123
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.85
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.131
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.74
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.119                                           
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.70
ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.189.249

Any idea?

 

Brocadian
Posts: 44
Registered: ‎01-05-2012

Re: ERROR: drv_pss_create_next_hop_for_arp: ipv4CreateLocalUcNextHop returns 0x13 for IP: xx.**filtered**.xx.xx

what code level the FESX-448-PREM is running?

The error message itself is complaining that  it is not able to create nexthop in hw for incoming arp entries

 

You either has large # of arp that exceed hw resources or the box is running older code that the driver has not been cleaned up.( pre 7202g and 7300c code )

 

when the messages gets excessive, it will spike up your cpu and make the box inaccesible via console.

As the severity increase, the Errro message will get garbled and clumped up to show just "ERROR ERROR ERROR ....."

 

Flushing the arp may bring temperary relief, but you need TAC to take a deeper look at the box before you lost control of it.

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.