Ethernet Switches & Routers

Reply
Occasional Visitor
Posts: 1
Registered: ‎06-27-2016

Does anyone have a working configuration of 802.1x enabled with NPS and Brocade ICX6610

Have a couple hundred of Brocade switches deployed (ICX 6610) with Distro as ICX 7750s and Core as MLXe - 8-slot switches.  Moving away from Cisco and trying to get Dual Mode working with 802.1x enabled on Microsoft Network Policy Server (NPS).  Most ports are configured as Dual-mode (Cisco IP Phones daisychained with a laptop) and works fine without 802.1x enabled.  As soon as we drop the 802.1x authentication configuration on the switch, it doesn't like any of the dual-mode commands.

 

Any help getting this sorted out would be greatly appreciated.

 

Here are some basic configs on the ICX 6610 Access switches:

 

********************************

Standard Brocade access switch dot1x conf

********************************

authentication

 auth-order mac-auth dot1x

 auth-default-vlan 600

 restricted-vlan 666

 auth-fail-action restricted-vlan

 re-authentication

 pass-through lldp

 dot1x enable

 dot1x enable ethe 1/1/47

 dot1x max-req 3

 dot1x timeout tx-period 60

 dot1x timeout quiet-period 30

 mac-authentication enable

 mac-authentication enable ethe 1/1/47

 mac-authentication dot1x-override

 

********************************

Standard Brocade access switch data port

********************************

interface ethernet 1/1/1

 dot1x port-control auto

 inline power

 stp-protect

 stp-bpdu-guard

 

********************************

Standard Brocade voice config

********************************

cdp run

fdp run

lldp tagged-packets process

lldp med network-policy application voice tagged vlan 100 priority 3 dscp 22 ports ethe 1/1/1 to 1/1/46

lldp run

 

Frequent Contributor
Posts: 95
Registered: ‎03-23-2015

Re: Does anyone have a working configuration of 802.1x enabled with NPS and Brocade ICX6610

Hi @amer.saeed,

 

First off welcome to the community and thanks for posting. I see you have a case open with TAC. Have they been able to help you out? Please let me know if there is anything I can do.

Dennis Smith
Manager Brocade Communities
@DennisMSmith
Occasional Contributor
Posts: 13
Registered: ‎03-13-2015

Re: Does anyone have a working configuration of 802.1x enabled with NPS and Brocade ICX6610

[ Edited ]

Have a simliar setup and getting ready to deploy 802.1x, so any insight would be appreciated

New Contributor
Posts: 3
Registered: ‎12-07-2015

Re: Does anyone have a working configuration of 802.1x enabled with NPS and Brocade ICX6610

Hi, I have the same issue, any help from Brocade team

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.