Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 14
Registered: ‎07-07-2015

Brocade ICX 7750 SNMP for MRTG

Hi,

 

We have 2 Brocade ICX 7750s. We want to monitor uplink port via MRTG. I configure Switch;

 

(config)# snmp-server community public ro

(config)# snmp-server host "Ipaddress" version v1 public

 

 I use command our MRTG server "snmpwalk -v 1 -c public Ipaddress" but  Response is " Timeout: No Response from Ipaddress". What is the problem?

Best Regards

Contributor
Posts: 59
Registered: ‎02-25-2016

Re: Brocade ICX 7750 SNMP for MRTG

Can you give us the output of 

 

show snmp server

Regards
Jörg Kost
Occasional Contributor
Posts: 14
Registered: ‎07-07-2015

Re: Brocade ICX 7750 SNMP for MRTG

Hi Jörg Kost,

 

firstly thank yor for help.

 

SSH@KAMUSM-DIS-BACKBONE(config)#sh snmp server  
 
       Status: Enabled
 
      Contact:
     Location:  
     Community(ro): public
 
 
Max Ifindex per module: 64
 
Traps
                   Cold start: Enable
                      Link up: Enable
                    Link down: Enable
               Authentication: Enable
         Power supply failure: Enable
                  Fan failure: Enable
             Fan speed change: Enable
              Module inserted: Enable
               Module removed: Enable
Redundant module state change: Enable
          Temperature warning: Enable
                 STP new root: Enable
          STP topology change: Enable                              
             MAC notification: Enable
        MAC-AUTH notification: Enable
                         OSPF: Enable
                          BGP: Enable
                         ISIS: Enable
                         VRRP: Enable
                         VSRP: Enable
                          MRP: Enable
                         UDLD: Enable
                          VRF: Enable
                     link-oam: Enable
                          cfm: Enable
 
 Total Trap-Receiver Entries: 1
 
Trap-Receiver IP-Address               Version   Port-Number Comm-or-Security                  
     1        "IPaddress"                v1           161     $U2kyXj1k    

 

Best Regards

Contributor
Posts: 59
Registered: ‎02-25-2016

Re: Brocade ICX 7750 SNMP for MRTG

Hi,

 

i think you need to add the client like:

 

snmp-client $IPADDRESS

 

Currently it looks like its only configured for receiving traps.

Regards
Jörg Kost
Occasional Contributor
Posts: 14
Registered: ‎07-07-2015

Re: Brocade ICX 7750 SNMP for MRTG

Hi,

 

I have already added snmp-client. But i have no response. How can i get interface statistics ?

 

Best Regards

 

Mesut UGURLU

Contributor
Posts: 59
Registered: ‎02-25-2016

Re: Brocade ICX 7750 SNMP for MRTG

Hi,

 

can you ping the device from your snmp client? Also, can you change the configuration and the snmp walk call to snmp version 2 with community support?

Regards
Jörg Kost

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.