Ethernet Switches & Routers

Reply
New Contributor
r.hari
Posts: 2
Registered: ‎12-02-2012

BR-MLX-1GCx24-X CARD_STATE_INTERACTIVE S3: Configured as invalid module)

Dear all

   I am a getting CARD_STATE_INTERACTIVE  (Configured as invalid module)  error message on NetIron MLX-8   BR-MLX-1GCx24-X module

Contributor
serhat.kahraman
Posts: 61
Registered: ‎12-08-2009

Re: BR-MLX-1GCx24-X CARD_STATE_INTERACTIVE S3: Configured as invalid module)

It seems there is a image version mismatch between your modules. I suggest you to do an upgrade the modules with the correct versions.

http://www.brocade.com/forms/getFile?p=documents/product_manuals/B_NetIron/NetIronUnified_05400a_Upg...

New Contributor
r.hari
Posts: 2
Registered: ‎12-02-2012

Re: BR-MLX-1GCx24-X CARD_STATE_INTERACTIVE S3: Configured as invalid module)

I fix the issue

snmp-server max-ifindex-per-modul 64

Brocade recommends that you run diagnostics on the module running with factory default configuration, so that the module does not work any protocol process while the diagnostics are running. If you need to configure some commands such as snmp-server max-ifindex-per-module <num> to recognize the modules, the minimum configuration to recognize would be approved.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.