Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 5
Registered: ‎11-28-2011

Activate the card FCX-4G (1000 Mbps combo module)

Hi,

How to activate the card FCX-4G (1000 Mbps combo module) on a FCX 624?

Best regards

PS:I do not see "module 2" with a show module?!

#show module

       Module                                         Status Ports Starting MAC 

U1:M1  FCX-24G 24-port Management Module                OK     24   xxx.xx.xx

#show media

1/1/1:M-SX  1/1/2:C  1/1/3:C  1/1/4:C  1/1/5:C  1/1/6:C  1/1/7:C  1/1/8:C  1/1/9:C  1/1/10:C  1/1/11:C  1/1/12:C  1/1/13:C  1/1/14:C  1/1/15:C  1/1/16:C  1/1/17:C  1/1/18:C  1/1/19:C  1/1/20:C  1/1/21:C  1/1/22:C  1/1/23:C  1/1/24:C

Brocadian
Posts: 70
Registered: ‎03-14-2009

Re: Activate the card FCX-4G (1000 Mbps combo module)

Hi Mischa,

sometime the module has to be pushed several times into the slot to work.

Did you follow the install guide and reload the switch?

Alex

Occasional Contributor
Posts: 5
Registered: ‎11-28-2011

Re: Activate the card FCX-4G (1000 Mbps combo module)

Hi,


Yes I followed.


With the combo cards the first 4 copper interfaces should not be used, right?

Brocadian
Posts: 70
Registered: ‎03-14-2009

Re: Activate the card FCX-4G (1000 Mbps combo module)

yes, the 4x 1G module ports are combo ports. numbering is

1/0/1 to 1/0/4.

There is no module 2 visible. This is only available with the 4x10G module.

Alex

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.