Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 6
Registered: ‎09-03-2013

802.1ag problem

Hi:team

 

mep1------brocade;

these two devices are connected ,the configuration of Brocade router is below:

telnet@NetIron CES 2048CX(config)#show cfm domain banmd

Domain: banmd

Index: 7

Level: 7

  Maintenance association: banma

  Ma Index: 7

  CCM interval: 1000 ms

  VLAN ID: 200

  Priority: 7

  MEP   Direction  MAC             PORT 

  ====  =========  =========       ==== 

     7  DOWN       748e.f8a5.6f09  ethe 1/9

 

MIP VLAN/VC Port Level MAC

  ====    ========        =====        =====    ==========      

              200         1/5              7    748e.f8a5.6f05

 

telnet@NetIron CES 2048CX#cfm loopback domain banmd ma banma src-mep 7 target-mep 7

Issue loopback: dst MEP id 7

Xmiting dot1ag loopback packets failed.

 

my question is :is my mep right?

                 why Loopback is failed?

            in remote-mep: Remote-mep mepid1 to mepid2,what is the use of mepid2?

 

 

tianks!

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.