Ethernet Fabric (VDX, CNA)

Reply
Occasional Visitor
Posts: 1
Registered: ‎08-09-2016

VDX6740 FCOE switch configuration issues

I have configured brocade VDX6740 FCOE sw  and show fcoe interface brief showing ethernet-port prot Down and Ty Sta, How can we make prot up and ethernet-port typ as dynamic and even show name-server is showing 0 values, whereas sh lldp neighbour is showing connected device mac address

 

BRCD6740-253-11(config)# do sho fcoe interfa brie
================================================================================
FCOE IF Mode Status Ethernet-Port Enode-Binding #VN
Cfg Cur Config Prot Typ Interface Typ Mac-address Ports
================================================================================
1/5/1 VF VF Up Down Sta Te 5/0/1 - - 0
1/5/2 VF VF Up Down Sta Te 5/0/2 - - 0
1/5/3 VF VF Up Down Sta Te 5/0/3 - - 0
1/5/4 VF VF Up Down Sta Te 5/0/4 - - 0
1/5/5 VF VF Up Down Sta Te 5/0/5 - - 0

 

BRCD6740-253-11(config-rbridge-id-5)# do sh lldp neigh
Local Intf Dead Interval Remaining Life Remote Intf Chassis ID Tx Rx System Name
Te 5/0/1 120 100 000e.1e52.6cf0 000e.1e52.6cf0 121 119
Te 5/0/2 120 100 000e.1e52.6cf2 000e.1e52.6cf2 121 119
Te 5/0/3 120 100 000e.1e50.f542 000e.1e50.f542 121 119
Te 5/0/4 120 100 000e.1e50.f540 000e.1e50.f540 121 119
Te 5/0/5 120 100 000e.1e52.6dc0 000e.1e52.6dc0 121 119

 

BRCD6740-253-11(config-rbridge-id-5)# do show name-server brief
0 entries
BRCD6740-253-11(config-rbridge-id-5)#

 

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.